Paintball silencers for Hammerhead / Lapco / Nemesis barrels
New, longer version. Approx. 15cm total length. (see comparison last picture, old version on the left, new version on the right)
This silencer model bolts onto the front of the barrel and fits all Hammerhead BattleStixx, Hammerhead BangStixx, Lapco and Carmatech Nemesis barrels. NEW: The silencer also fits the barrel of the Hardstyle AK20.
( Not suitable for Hammerhead OneShot barrels, as they have a 22mm thread!)
The special thing about this muffler model is that it is really built like a muffler, but without filling for the function. The air is pressed along the entire length of the silencer through small holes into the outer chamber and from there it is discharged to the rear through additional holes. Thus, the shot noise is dampened at the front of the barrel muzzle. Cotton wool or professional insulating wool for silencers from specialist stores can be used as filling material.
By installing the filling, a significant reduction in the shot noise can be achieved for games abroad, depending on the filling used.
Length: Approx. 21 cm (threaded)
ATTENTION - The use of fully functional silencer models is prohibited in Germany. Therefore, this article is sold by us without filling and therefore without function. We ask for your understanding.
Importeur / EU-Verantwortlicher
Schöner Schalldämpfer, habe ihn mit Watte gewickelt, bringt gefühlt nur 15% Dämpfung, könnte mehr sein, angebaut an einer offenen T15 mit ca. 18 Joule mit S63 Lauf. Wenn ich die Joule bei der T15 runterschraube, dann wird sie leiser, macht aber nicht mehr so viel Fun. Naja, Style gewinnt halt immer 😎
Sehr gut verarbeitet und logischer Aufbau.
Sehr schnelle Lieferung