Make your marker lighter, use a hose system...

The marker is simply too heavy for many paintball players. If you consider that the marker, hopper and HP system add up to a total weight of 2.5 kg, up to 5 kg for woodland markers, this is quite understandable. A remote hose system can help because it allows the compressed air bottle to be placed on the player's back, in the so-called battlepack or vest .

The pressure from the HP system is passed through the Paintball Remote System, or Mamba Remote System, to the marker. The hoses weigh only a few hundred grams, can be stretched to a length of up to 1.5 meters and are very flexible. This makes it much easier for the player to handle his weapon.

If your marker has a shoulder rest, for example, a hose system is always an advantage. In tournament markers, the HP bottle is used as a kind of shoulder rest. This is not necessary with woodland markers , as they usually have their own shoulder rest. So you would run the bottle under the shoulder rest. This is not only difficult, it also just looks stupid and distorts the replica look of the marker, which is what most players care about.

What should I consider when buying a hose system?

One should pay particular attention to quality and processing. The remote system is part of the marker's high-pressure equipment and should therefore be of good quality, after all a pressure of up to 55 bar flows through the hose.

In the end, if you buy a cheap remote system, the quality and thus the security of the player may suffer. Good hoses can withstand about three times the pressure at which they are operated. For example, all remote systems sold by us meet the standard that the hose can withstand 3000PSI / 300 bar inflation pressure. Since the currently strongest regulator models only have an outlet pressure of 1100 PSI, the hoses are more than sufficiently strong and safe. There's nothing worse on the field than having a hose burst and then slamming it in the player's face with high pressure.

Danger! - There are some clear differences in remote systems.

There are many different model series for paintball hose systems. The simple models are only intended for the flow of gas to the marker, others have additional features such as shut-off valves, pressure gauges and quick couplings. The diameter of the hose can also vary. There are hoses with a small diameter (approx. 3-5mm) and the large systems, which have an inner diameter of 6mm or an outer diameter of 10-12mm.

With us you always get a large selection of different, up-to-date paintball remote systems, optionally with slide check, on/off switch and quick coupling.